A:In addition to free software with the machine, we have free aftersales training to our customer once customer receiving our machines on how to operate the machine properly & efficiently.

A:you are looking for the right supplier now, we can meet your demand in perfect conditions: as our machine can refurbish the used NiMH battery after several cycles of charging and discharging, every unit of machine can handle 8 modules via 8 channels independently. Per your monthly figure of 1400-1500 modules of NiMH battery, we recommend you 8 machines to finish the refurbishing process.

A: 12 to 13 hours to finish 4 cycles

A:After measuring our machine size and area, I would say one set e.g. 4 machines in 1 cabinet plus 1 cooling table will occupy about 1.5 sqm, if 2 sets means 3 sqm. plus working space, you need at least some 6 sqm for the work. but this is also depending on how you will set up the machines and cabinet, which may save your space.
A： we provide free training service for new customer, plus trouble shooting service upon request in 1 year warranty

A:yes, we provide training upon your purchasing our machines, plus the theory of NiMH repair. Also we have a lot tips on how to operate the machines and how to prevent cell burning etc during operation etc. plus how to identify good and bad cells after battery reconditioning.

A: each single channel max. voltage is 20V, hence can check battery with 20v below, including NiMH, Lithium or other batteries,

A: each single channel max. Amperage is 5a,

A: we can provide related plug and socket per local countries grid requirements,

A: the cabinet has grounding cable, each unit of machine also has grounding line,

A: there is no special maintenance measures as long as customer use it properly per our training guidance in normal room with temp. 20-45degree Celsius.

A: For Toyota Ni-mh batteries, this machine can charge and discharge the battery multiple times through the set steps. It has two functions. 1. Eliminate the capacity memory of NI-MH batteries, activate and repair the battery capacity
2. Get the final capacity of the battery. Filter good batteries and bad batteries.
A: If the capacity of a cell does not change much after each cycle test and is less than 3500mah, this is a non-repairable battery.
In addition, you need to classify the repaired batteries into different grades, for example: 3500mah~4500mah, 4500mah~5500mah, 5500～6500mah, and the selling price of each grade is different. When your customers buy batteries from you and bulid a new battery pack. The battery pack 28 pcs capacity difference cannot be about 300mah. Otherwise, after installing them in the car, the car will soon display an error code
A:After 4 cycles, all batteries should be removed and stored or discarded according to capacity. There is no need to recondition a good 26-cell battery again. as I said ， They are independent About the number of channels. You can buy 7 units for 2 sets of 28pc battery packs. Although it is just right, we suggest, that you can buy more spare channels to prevent a channel from failing, so as not to affect the work. Besides, some battery packs are 20pcs, 32pcs, 34pcs, 40pcs .So，we suggest you can buy 8 units if impossible
If we have 64 channels we can refurbish 64 cells and then based on their capacity we can build packs,While building a pack it is important to check difference in capacity it can not be bigger than 300mAh

A:No voltage regulator required when machine operating in a stable grid conditions.